Enum darwinia_balances::pallet::Call
source · [−]pub enum Call<T: Config<I>, I: 'static = ()> {
transfer {
dest: <T::Lookup as StaticLookup>::Source,
value: T::Balance,
},
set_balance {
who: <T::Lookup as StaticLookup>::Source,
new_free: T::Balance,
new_reserved: T::Balance,
},
force_transfer {
source: <T::Lookup as StaticLookup>::Source,
dest: <T::Lookup as StaticLookup>::Source,
value: T::Balance,
},
transfer_keep_alive {
dest: <T::Lookup as StaticLookup>::Source,
value: T::Balance,
},
transfer_all {
dest: <T::Lookup as StaticLookup>::Source,
keep_alive: bool,
},
force_unreserve {
who: <T::Lookup as StaticLookup>::Source,
amount: T::Balance,
},
// some variants omitted
}
Expand description
Contains one variant per dispatchable that can be called by an extrinsic.
Variants
transfer
Transfer some liquid free balance to another account.
transfer
will set the FreeBalance
of the sender and receiver.
If the sender’s account is below the existential deposit as a result
of the transfer, the account will be reaped.
The dispatch origin for this call must be Signed
by the transactor.
- Dependent on arguments but not critical, given proper implementations for input config types. See related functions below.
- It contains a limited number of reads and writes internally and no complex computation.
Related functions:
ensure_can_withdraw
is always called internally but has a bounded complexity.- Transferring balances to accounts that did not exist before will cause
T::OnNewAccount::on_new_account
to be called. - Removing enough funds from an account will trigger
T::DustRemoval::on_unbalanced
. transfer_keep_alive
works the same way astransfer
, but has an additional check that the transfer will not kill the origin account.
set_balance
Set the balances of a given account.
This will alter FreeBalance
and ReservedBalance
in storage. it will
also alter the total issuance of the system (TotalIssuance
) appropriately.
If the new free or reserved balance is below the existential deposit,
it will reset the account nonce (frame_system::AccountNonce
).
The dispatch origin for this call is root
.
force_transfer
Fields
value: T::Balance
Exactly as transfer
, except the origin must be root and the source account may be
specified.
- Same as transfer, but additional read and write because the source account is not assumed to be in the overlay.
transfer_keep_alive
Same as the transfer
call, but with a check that the transfer will not kill the
origin account.
99% of the time you want transfer
instead.
transfer_all
Transfer the entire transferable balance from the caller account.
NOTE: This function only attempts to transfer transferable balances. This means that
any locked, reserved, or existential deposits (when keep_alive
is true
), will not be
transferred by this function. To ensure that this function results in a killed account,
you might need to prepare the account by removing any reference counters, storage
deposits, etc…
The dispatch origin of this call must be Signed.
dest
: The recipient of the transfer.keep_alive
: A boolean to determine if thetransfer_all
operation should send all of the funds the account has, causing the sender account to be killed (false), or transfer everything except at least the existential deposit, which will guarantee to keep the sender account alive (true). #- O(1). Just like transfer, but reading the user’s transferable balance first. #
force_unreserve
Unreserve some balance from a user by force.
Can only be called by ROOT.
Implementations
sourceimpl<T: Config<I>, I: 'static> Call<T, I>
impl<T: Config<I>, I: 'static> Call<T, I>
sourcepub fn new_call_variant_transfer(
dest: <T::Lookup as StaticLookup>::Source,
value: T::Balance
) -> Self
pub fn new_call_variant_transfer(
dest: <T::Lookup as StaticLookup>::Source,
value: T::Balance
) -> Self
Create a call with the variant transfer
.
sourcepub fn new_call_variant_set_balance(
who: <T::Lookup as StaticLookup>::Source,
new_free: T::Balance,
new_reserved: T::Balance
) -> Self
pub fn new_call_variant_set_balance(
who: <T::Lookup as StaticLookup>::Source,
new_free: T::Balance,
new_reserved: T::Balance
) -> Self
Create a call with the variant set_balance
.
sourcepub fn new_call_variant_force_transfer(
source: <T::Lookup as StaticLookup>::Source,
dest: <T::Lookup as StaticLookup>::Source,
value: T::Balance
) -> Self
pub fn new_call_variant_force_transfer(
source: <T::Lookup as StaticLookup>::Source,
dest: <T::Lookup as StaticLookup>::Source,
value: T::Balance
) -> Self
Create a call with the variant force_transfer
.
sourcepub fn new_call_variant_transfer_keep_alive(
dest: <T::Lookup as StaticLookup>::Source,
value: T::Balance
) -> Self
pub fn new_call_variant_transfer_keep_alive(
dest: <T::Lookup as StaticLookup>::Source,
value: T::Balance
) -> Self
Create a call with the variant transfer_keep_alive
.
sourcepub fn new_call_variant_transfer_all(
dest: <T::Lookup as StaticLookup>::Source,
keep_alive: bool
) -> Self
pub fn new_call_variant_transfer_all(
dest: <T::Lookup as StaticLookup>::Source,
keep_alive: bool
) -> Self
Create a call with the variant transfer_all
.
sourcepub fn new_call_variant_force_unreserve(
who: <T::Lookup as StaticLookup>::Source,
amount: T::Balance
) -> Self
pub fn new_call_variant_force_unreserve(
who: <T::Lookup as StaticLookup>::Source,
amount: T::Balance
) -> Self
Create a call with the variant force_unreserve
.
Trait Implementations
sourceimpl<T: Config<I>, I: 'static> Decode for Call<T, I>
impl<T: Config<I>, I: 'static> Decode for Call<T, I>
sourcefn decode<__CodecInputEdqy: Input>(
__codec_input_edqy: &mut __CodecInputEdqy
) -> Result<Self, Error>
fn decode<__CodecInputEdqy: Input>(
__codec_input_edqy: &mut __CodecInputEdqy
) -> Result<Self, Error>
Attempt to deserialise the value from input.
fn skip<I>(input: &mut I) -> Result<(), Error> where
I: Input,
fn skip<I>(input: &mut I) -> Result<(), Error> where
I: Input,
Attempt to skip the encoded value from input. Read more
fn encoded_fixed_size() -> Option<usize>
fn encoded_fixed_size() -> Option<usize>
Returns the fixed encoded size of the type. Read more
sourceimpl<T: Config<I>, I: 'static> Encode for Call<T, I>
impl<T: Config<I>, I: 'static> Encode for Call<T, I>
sourcefn encode_to<__CodecOutputEdqy: Output + ?Sized>(
&self,
__codec_dest_edqy: &mut __CodecOutputEdqy
)
fn encode_to<__CodecOutputEdqy: Output + ?Sized>(
&self,
__codec_dest_edqy: &mut __CodecOutputEdqy
)
Convert self to a slice and append it to the destination.
fn encode(&self) -> Vec<u8, Global>ⓘNotable traits for Vec<u8, A>impl<A> Write for Vec<u8, A> where
A: Allocator,
fn encode(&self) -> Vec<u8, Global>ⓘNotable traits for Vec<u8, A>impl<A> Write for Vec<u8, A> where
A: Allocator,
A: Allocator,
Convert self to an owned vector.
fn using_encoded<R, F>(&self, f: F) -> R where
F: FnOnce(&[u8]) -> R,
fn using_encoded<R, F>(&self, f: F) -> R where
F: FnOnce(&[u8]) -> R,
Convert self to a slice and then invoke the given closure with it.
fn encoded_size(&self) -> usize
fn encoded_size(&self) -> usize
Calculates the encoded size. Read more
sourceimpl<T: Config<I>, I: 'static> GetCallName for Call<T, I>
impl<T: Config<I>, I: 'static> GetCallName for Call<T, I>
sourcefn get_call_name(&self) -> &'static str
fn get_call_name(&self) -> &'static str
Return the function name of the Call.
sourcefn get_call_names() -> &'static [&'static str]
fn get_call_names() -> &'static [&'static str]
Return all function names.
sourceimpl<T: Config<I>, I: 'static> GetDispatchInfo for Call<T, I>
impl<T: Config<I>, I: 'static> GetDispatchInfo for Call<T, I>
sourcefn get_dispatch_info(&self) -> DispatchInfo
fn get_dispatch_info(&self) -> DispatchInfo
Return a DispatchInfo
, containing relevant information of this dispatch. Read more
sourceimpl<T: Config<I>, I: 'static> TypeInfo for Call<T, I> where
PhantomData<(T, I)>: TypeInfo + 'static,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
T::Balance: HasCompact,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
T::Balance: HasCompact,
T::Balance: HasCompact,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
T::Balance: HasCompact,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
T::Balance: HasCompact,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
T::Balance: TypeInfo + 'static,
T: Config<I> + 'static,
I: 'static,
impl<T: Config<I>, I: 'static> TypeInfo for Call<T, I> where
PhantomData<(T, I)>: TypeInfo + 'static,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
T::Balance: HasCompact,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
T::Balance: HasCompact,
T::Balance: HasCompact,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
T::Balance: HasCompact,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
T::Balance: HasCompact,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
<T::Lookup as StaticLookup>::Source: TypeInfo + 'static,
T::Balance: TypeInfo + 'static,
T: Config<I> + 'static,
I: 'static,
sourceimpl<T: Config<I>, I: 'static> UnfilteredDispatchable for Call<T, I>
impl<T: Config<I>, I: 'static> UnfilteredDispatchable for Call<T, I>
type Origin = <T as Config>::Origin
type Origin = <T as Config>::Origin
The origin type of the runtime, (i.e. frame_system::Config::Origin
).
sourcefn dispatch_bypass_filter(
self,
origin: Self::Origin
) -> DispatchResultWithPostInfo
fn dispatch_bypass_filter(
self,
origin: Self::Origin
) -> DispatchResultWithPostInfo
Dispatch this call but do not check the filter in origin.
impl<T: Config<I>, I: 'static> EncodeLike<Call<T, I>> for Call<T, I>
impl<T: Config<I>, I: 'static> Eq for Call<T, I>
Auto Trait Implementations
impl<T, I> RefUnwindSafe for Call<T, I> where
I: RefUnwindSafe,
T: RefUnwindSafe,
<T as Config<I>>::Balance: RefUnwindSafe,
<<T as Config>::Lookup as StaticLookup>::Source: RefUnwindSafe,
impl<T, I> Send for Call<T, I> where
I: Send,
T: Send,
<<T as Config>::Lookup as StaticLookup>::Source: Send,
impl<T, I> Sync for Call<T, I> where
I: Sync,
T: Sync,
<<T as Config>::Lookup as StaticLookup>::Source: Sync,
impl<T, I> Unpin for Call<T, I> where
I: Unpin,
T: Unpin,
<T as Config<I>>::Balance: Unpin,
<<T as Config>::Lookup as StaticLookup>::Source: Unpin,
impl<T, I> UnwindSafe for Call<T, I> where
I: UnwindSafe,
T: UnwindSafe,
<T as Config<I>>::Balance: UnwindSafe,
<<T as Config>::Lookup as StaticLookup>::Source: UnwindSafe,
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> CheckedConversion for T
impl<T> CheckedConversion for T
fn checked_from<T>(t: T) -> Option<Self> where
Self: TryFrom<T>,
fn checked_from<T>(t: T) -> Option<Self> where
Self: TryFrom<T>,
Convert from a value of T
into an equivalent instance of Option<Self>
. Read more
fn checked_into<T>(self) -> Option<T> where
Self: TryInto<T>,
fn checked_into<T>(self) -> Option<T> where
Self: TryInto<T>,
Consume self to return Some
equivalent value of Option<T>
. Read more
impl<T> DecodeLimit for T where
T: Decode,
impl<T> DecodeLimit for T where
T: Decode,
fn decode_all_with_depth_limit(limit: u32, input: &[u8]) -> Result<T, Error>
fn decode_all_with_depth_limit(limit: u32, input: &[u8]) -> Result<T, Error>
Decode Self
and consume all of the given input data. Read more
fn decode_and_advance_with_depth_limit<I>(
limit: u32,
input: &mut I
) -> Result<T, Error> where
I: Input,
fn decode_and_advance_with_depth_limit<I>(
limit: u32,
input: &mut I
) -> Result<T, Error> where
I: Input,
Decode Self
and advance input
by the number of bytes consumed. Read more
impl<T> Downcast for T where
T: Any,
impl<T> Downcast for T where
T: Any,
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<R, Global>impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<R, Global>impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
R: Read + ?Sized, impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
Convert Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
. Box<dyn Any>
can
then be further downcast
into Box<ConcreteType>
where ConcreteType
implements Trait
. Read more
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
Convert Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
. Rc<Any>
can then be
further downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
. Read more
fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert &Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s. Read more
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert &mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s. Read more
sourceimpl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
sourcefn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to key
and return true
if they are equal.
impl<T> FmtForward for T
impl<T> FmtForward for T
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
Causes self
to use its Binary
implementation when Debug
-formatted.
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
fn fmt_octal(self) -> FmtOctal<Self> where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self> where
Self: Octal,
Causes self
to use its Octal
implementation when Debug
-formatted.
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
impl<T> Hashable for T where
T: Codec,
impl<T> Hashable for T where
T: Codec,
fn blake2_128(&self) -> [u8; 16]
fn blake2_256(&self) -> [u8; 32]
fn blake2_128_concat(&self) -> Vec<u8, Global>ⓘNotable traits for Vec<u8, A>impl<A> Write for Vec<u8, A> where
A: Allocator,
A: Allocator,
fn twox_128(&self) -> [u8; 16]
fn twox_256(&self) -> [u8; 32]
fn twox_64_concat(&self) -> Vec<u8, Global>ⓘNotable traits for Vec<u8, A>impl<A> Write for Vec<u8, A> where
A: Allocator,
A: Allocator,
fn identity(&self) -> Vec<u8, Global>ⓘNotable traits for Vec<u8, A>impl<A> Write for Vec<u8, A> where
A: Allocator,
A: Allocator,
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
impl<T> Pipe for T where
T: ?Sized,
impl<T> Pipe for T where
T: ?Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
Pipes by value. This is generally the method you want to use. Read more
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,
Borrows self
and passes that borrow into the pipe function. Read more
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
Mutably borrows self
and passes that borrow into the pipe function. Read more
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.borrow()
into the pipe function. Read more
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.borrow_mut()
into the pipe
function. Read more
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.as_ref()
into the pipe function.
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.as_mut()
into the pipe
function. Read more
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.deref()
into the pipe function.
impl<T> PipeAsRef for T
impl<T> PipeAsRef for T
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> R where
Self: AsMut<T>,
T: 'a,
R: 'a,
fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> R where
Self: AsMut<T>,
T: 'a,
R: 'a,
Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more
impl<T> PipeBorrow for T
impl<T> PipeBorrow for T
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_borrow_mut<'a, T, R>(
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: BorrowMut<T>,
T: 'a,
R: 'a,
fn pipe_borrow_mut<'a, T, R>(
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: BorrowMut<T>,
T: 'a,
R: 'a,
Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more
impl<T> PipeDeref for T
impl<T> PipeDeref for T
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
Pipes a dereference into a function that cannot normally be called in suffix position. Read more
fn pipe_deref_mut<'a, R>(
&'a mut self,
func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
Self: DerefMut,
R: 'a,
fn pipe_deref_mut<'a, R>(
&'a mut self,
func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
Self: DerefMut,
R: 'a,
Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more
impl<T> PipeRef for T
impl<T> PipeRef for T
impl<T> Pointable for T
impl<T> Pointable for T
impl<T> SaturatedConversion for T
impl<T> SaturatedConversion for T
fn saturated_from<T>(t: T) -> Self where
Self: UniqueSaturatedFrom<T>,
fn saturated_from<T>(t: T) -> Self where
Self: UniqueSaturatedFrom<T>,
Convert from a value of T
into an equivalent instance of Self
. Read more
fn saturated_into<T>(self) -> T where
Self: UniqueSaturatedInto<T>,
fn saturated_into<T>(self) -> T where
Self: UniqueSaturatedInto<T>,
Consume self to return an equivalent value of T
. Read more
impl<T> Tap for T
impl<T> Tap for T
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Immutable access to the Borrow<B>
of a value. Read more
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Mutable access to the BorrowMut<B>
of a value. Read more
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Immutable access to the AsRef<R>
view of a value. Read more
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Mutable access to the AsMut<R>
view of a value. Read more
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self where
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self where
Self: Deref<Target = T>,
T: ?Sized,
Immutable access to the Deref::Target
of a value. Read more
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self where
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self where
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
Mutable access to the Deref::Target
of a value. Read more
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls .tap()
only in debug builds, and is erased in release builds.
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls .tap_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Calls .tap_borrow()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Calls .tap_borrow_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Calls .tap_ref()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Calls .tap_ref_mut()
only in debug builds, and is erased in release
builds. Read more
impl<T> Tap for T
impl<T> Tap for T
fn tap<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,
fn tap<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,
Provides immutable access for inspection. Read more
fn tap_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,
fn tap_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,
Calls tap
in debug builds, and does nothing in release builds.
fn tap_mut<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
fn tap_mut<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
Provides mutable access for modification. Read more
fn tap_mut_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
fn tap_mut_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
Calls tap_mut
in debug builds, and does nothing in release builds.
impl<T, U> TapAsRef<U> for T where
U: ?Sized,
impl<T, U> TapAsRef<U> for T where
U: ?Sized,
fn tap_ref<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
fn tap_ref<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
Provides immutable access to the reference for inspection.
fn tap_ref_dbg<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
fn tap_ref_dbg<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
Calls tap_ref
in debug builds, and does nothing in release builds.
fn tap_ref_mut<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_ref_mut<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the reference for modification.
fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
Calls tap_ref_mut
in debug builds, and does nothing in release builds.
impl<T, U> TapBorrow<U> for T where
U: ?Sized,
impl<T, U> TapBorrow<U> for T where
U: ?Sized,
fn tap_borrow<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
fn tap_borrow<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
Provides immutable access to the borrow for inspection. Read more
fn tap_borrow_dbg<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
fn tap_borrow_dbg<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
Calls tap_borrow
in debug builds, and does nothing in release builds.
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the borrow for modification.
fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Calls tap_borrow_mut
in debug builds, and does nothing in release
builds. Read more
impl<T> TapDeref for T
impl<T> TapDeref for T
fn tap_deref<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Immutably dereferences self
for inspection.
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Calls tap_deref
in debug builds, and does nothing in release builds.
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Mutably dereferences self
for modification.
fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Calls tap_deref_mut
in debug builds, and does nothing in release
builds. Read more
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
impl<S, T> UncheckedInto<T> for S where
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for S where
T: UncheckedFrom<S>,
fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
The counterpart to unchecked_from
.
impl<T, S> UniqueSaturatedInto<T> for S where
T: Bounded,
S: TryInto<T>,
impl<T, S> UniqueSaturatedInto<T> for S where
T: Bounded,
S: TryInto<T>,
fn unique_saturated_into(self) -> T
fn unique_saturated_into(self) -> T
Consume self to return an equivalent value of T
.
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
fn vzip(self) -> V
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more